EVO-9S

EVO-9S 3" EVO ELECT. START KIT 1990-UP SOFTAIL

0 Review(s) Write a Review

Your Price: $1,911.50

3" EVO ELECT. START KIT 1990-UP SOFTAIL

Part Number: EVO-9S

Availability: In Stock

Quantity

Description
Kit Breakdown
Rear Basket Breakdown
Hub Breakdown
Front Pulley and Insert Breakdown

This is it. This is the one. The EVO-9S, the most popular belt drive kit ever. Everybody wants this belt drive kit. More than 50,000 of these kits are on the streets. The cleanest and sleekest of all belt drives, this 3 inch wide baby has been purrin' down the roads of the entire world for decades!

Name a country and this drive has probably been there! Name a bike builder and they have used one. If you have a Softail® style motorcycle from 1990 – 2006 this is the most affordable and durable belt drive for you. You too can have the kit that most all of the “Build your own Bike” kits used and still use to this day.

The dual dome scalloped side guard kit comes with a 47 tooth front pulley and 72 tooth rear basket and the 141 by 3 inch wide belt. Along with our famous customer approved Kevlar clutch plates and most recognized domed pressure plate out there, this pressure plate has the capability of using either 6, 8, 9 or 12 coil springs to meet your power needs. You adjust the pull and pressure of your clutch by the number of springs you install.

Want that Hot Rod look? Remove the domed pulley covers and you have that Bad Boy look. This motorplate starts as a 40 lb. piece of 6061-T6 billet, then we have are way with it. Add some of our favorite components and BOOM! it comes to life.

	DESCRIPTION	BDL PART NO.
A	Rear Basket (breakdown below)	72-3E
B	47 Tooth Front Pulley (breakdown below)	47-OFP
C	3" HTD Rubber Belt	BDL-141-3
D	Clutch Hub	EV-180
E	Complete Clutch Kit (inc. fibers and steels)	ERCPS-100
F	Spring Pressure Plate	EPP-100
G	Hub Nut with Seal	HNS-100
H	Adjusting Screw and Nut	CDAS-100
I	Shoulder Bolts Set of 6	ESB-100
J	Coil Springs	ECS-100
K	Front Pulley Nut & Washer	FHN-2, WA-3
L	Hardware kit for EVO-9S	HK-9
M	Softail Motor Plate	MP-9
MB	Motor Plate Bearing	MPB-9
N	Starter Housing	SH-9A
O	Side Plate	SP-9
P	Dome Covers	MD-100
Q	Starter Pinion Gear	PG-100

	DESCRIPTION	BDL PART NO.
A	Rear Basket (includes all parts below when ordering 72-3E)	72-3E
A1	Starter ring Gear (optional)	SG-2
A2	Drive Dogs (set of 12)	EVRD-1
A3	Hub Bearing	EHB-100
A4	C-Clip for hub bearing	CC-244

	DESCRIPTION	BDL PART NO.
D	Inner Hub (parts below included with EV-180)	EV-180
D1	Step Washer & Screws	ESW-1
D2	C-Clip for Backside of Hub	CC-158

	DESCRIPTION	BDL PART NO.
B	Front Pulley 47 Tooth 3”	47-OFP
B1	Standard Insert (hardware included)	IN-STD